What are the actual weights
of the Troy MRF's and Battle Sights?
MRF |
DESCRIPTION |
WEIGHT |
| MRF - C | 7" Inch Model for M4, M16 & AR15 Carbines | 10.766 OZ |
| MRF - M | 9" Model for Mid Length Carbines | 13.552 OZ |
| MRF - MX | 10" Mid Length Extended Model for use with low profile gas block | 14.216 OZ |
| MRF - CX | 12" Carbine extended Model for use with Carbine fixed front sight post | 17.128 OZ |
| MRF- R | 12" Model for Rifle Length Gas Systems M16 (all Model's) | 18.328 OZ |
| MRF - RX | 13.5" Rifle Extended Model for SPR type set ups | 19.776 OZ |
MRF |
DESCRIPTION |
WEIGHT |
| FBSRA4 | Folding Battle Sight Rear | 1.823 OZ |
| FBSA4F | Folding Battle Sight Front | 1.552 OZ |
| FBSSET | Set - Folding Battle Sights (front and rear) | 3.345 OZ |
1 gram= 0.035274 oz
Does Troy Industries, Inc offer discounts to Contractors ?
Yes, we offer 5% contractors with
proof of employment. Form of employment can be as simple as
sales@troyind.com
What is the height off the picatinny rail are Troy Folding Battle Sights ?
When Folded height is .460 off
the rail, and is so low profile we have not found a optic yet
that it would not fit under. In the up positions the apertures
are the same as the factory sights.
What rail slot does the Troy Rear Battle Sight placed in ?
The Rear sight is placed in the
last rail slot available on your upper receiver closest to the
charging handle. On the SR-25 and DPMS LR-308 the rear
Is the Troy Drop-in stock a "True" drop in system ?
Yes, No extra bedding is required.
The installation should not take more than 15 min's, and is
very simple and user friendly.
Can the Troy Drop-in stock be adapted to different M14 /M1A set-ups ?
Yes, it can be used with all manufacturers
M14's and M1A's - From SOCOM's to Super Match non-lugged receivers.
Can the standard MRF work with AR10 / SR25 platforms ?
No, There the standard MRF will only work on the M4 / M16 / AR15 type carbines and rifles.
Can the M203 grenade launcher work with the MRF system?
Yes, the can be put on the rifle
by simply removing the lower rail. It needs no extra parts or
assembly to attach it. *** Railed mounted grenade launchers
will also work with the lower rail still intact.
Does the Troy Folding Battle Sights Co-witness ?
Yes. The Troy Rear Folding Battle
Sight is made to co-witness with standard "A" frame
front sight tower, or with any pictinny rail mounted folding
or non folding front sight. They are ideal for co-witnessing
though any
of the EOTech Holographic weapons sights or AimPoints (they
may work with other optics not listed above).
How does the sight hold
up with the BEOWULF 50 Cal ?
"The recoil of the Beowulf was one of the driving
factors in our selection of your sights for our weapon systems.
The Beowulf has an ability to find all the little loose parts
in a sight and then dismantle them. Previously we have had cross
pins fall out, pivot holes oval out and clamps bend out of shape.
We have not experienced any such problems with your units and
additionally they withstand the heavy handling that gets dished
out by our reps. "
-Bill Alexander of Alexander Arms
What Items / Features does the Troy M14 Drop-in Stock come with?
The Stock comes with the aluminum upper and lower half, TangoDown Rail Panels and BattleGrip and VLTOR collapsible 6pt Clubfoot stock. No sights or optics come with this kit, however they can be ordered along with your rifle.
What Attachments do I use to use the Troy One Point Sling ?
Our Troy One Point Slings are compliable with all M4 / M16 / AR15 type carbines and rifles. There are numerous ways to use this attachment, and Troy can supply you with all of these options.
What Items/Features does the Troy M14/M1A Drop-in Stock come with?
The Stock comes with the aluminum upper and lover half, Tango Down Rail Panels and Battle Grip and VLTOR collapsible stock. No sights or optics come with this kit, however they can be ordered along with your rifle.